"Getting access to the component" on page 47
Ê
"Removing the fan module" on page 151
Ê
9.5.7.2
Removing the defective BBU
Ê Remove the BBU with the holder as described in section
on page
201.
Figure 121: Removing the BBU from the BBU holder
Ê Press out on the right retaining bracket on the BBU holder to disengage the
locking mechanism while pulling up on the BBU (1).
Ê Fold up the BBU and at a slight angle remove it from the BBU holder (2).
TX140 S2
Upgrade and Maintenance Manual
Expansion cards and backup units
"Removing a BBU"
205