Using The Océ Automatic Installer Application On The Cd-Rom To Configure Your Machine For A Wireless Network - Oce cx2100 User Manual

h
If the following message appears, press a or b to choose On, then press OK. The wired network interface
will become inactive with this setting.
72.WLAN
WLAN Enable?
a
On
b
Off
Select ab or OK
i
The wireless network connection status using the SecureEasySetup™ software will be displayed;
Connecting WLAN, Connected or Connection NG.
Connecting WLAN is displayed when the print server is trying to make connections to your router or
access point. Wait till either Connected or Connection NG is displayed.
Connected is displayed when the print server is successfully connected to your router or access point.
You can now use your machine in a wireless network.
Connection NG is displayed when the print server has not successfully connected to your router or
access point. Try starting from b again. If the same message is displayed again, reset the print server
back to the default factory settings and try again.
Using the Océ automatic installer application on the CD-ROM to configure your
machine for a wireless network
See Wireless configuration for Windows
for information on how to use the Océ automatic installer application on the CD-ROM we have provided with
the machine.
®
on page 32 and Wireless Configuration for Macintosh
Configuring your machine for a wireless network
3
3
®
on page 57
28