OIL PUMP
Oil strainer
1. Inspect:
Oil strainer
●
Cracks/damage → Replace.
Contamination → Clean the flushing oil.
ASSEMBLY AND INSTALLATION
Oil pump
1. Install:
Oil pump housing
●
Outer rotor
●
Inner rotor
●
Pin
●
Oil pump shaft
●
Pin
●
Oil pump cover
●
Washer
●
Circlip
●
Conical spring washer
●
Oil pump driven gear
●
Circlip
●
Screws
●
NOTE:
Apply engine oil onto the outer rotor, inner
●
rotor and oil pump shaft.
Install the conical spring washer in the direc-
●
tion as shown.
2. Install:
Oil strainer
●
Gasket
●
Oil pump assembly
●
Screws (oil pump assembly)
●
NOTE:
Apply engine oil onto the crankcase oil pas-
sage and oil pump assembly.
3. Install:
Washer 1
●
Oil pump drive gear 2
●
Rotary filter 3
●
NOTE:
Install the washer with stamped "H" for the
●
side of the engine.
Install the oil pump drive gear with its groove
●
facing the engine.
Install the rotary filter with the dog
●
out.
Align the rotary filter dog
●
the crankshaft.
4 - 52
ENG
New
New
5 Nm (0.5 m · kg, 3.6 ft · lb)
New
7 Nm (0.7 m · kg, 5.1 ft · lb)
with groove
facing
of