Yamaha TT-R125(W) Owner's Service Manual page 566

REAR SHOCK ABSORBER ASSEMBLY
EC585000
ASSEMBLY AND INSTALLATION
Bushing
1. Install:
Bushing 1
G
NOTE:
Install the bushing by pressing.
Installation
1. Install:
Rear shock absorber assembly
G
On frame.
NOTE:
Install the rear shock absorber assembly with its
warning label a facing left side of the machine
(for TT-R125/TT-R125E/TT-R125LW).
2. Install:
Bolt (rear shock absorber assembly -
G
frame)
Plain washer 1
G
Nut (rear shock absorber assembly -
G
frame) 2
NOTE:
Apply the molybdenum disulfide grease on the
bolt (rear shock absorber assembly - frame).
3. Install:
Bolt (rear shock absorber assembly -
G
relay arm)
Plain washer 1
G
Nut (rear shock absorber assembly -
G
relay arm) 2
NOTE:
Apply the molybdenum disulfide grease on the
bolt (rear shock absorber assembly - relay
arm).
5 - 68
CHAS
53 Nm (5.3 m · kg, 38 ft · lb)
35 Nm (3.5 m · kg, 25 ft · lb)