Kick Axle Assembly - Yamaha TT-R125(W) Owner's Service Manual

KICK AXLE AND SHIFT SHAFT
Shift shaft
1. Install:
NOTE:
Apply the lithium soap base grease on the oil
G
seal lip of the left crankcase side.
Hook the spring ends onto the stopper 2.
G

Kick axle assembly

1. Install:
NOTE:
Make sure the stopper a of the torsion spring
fits into the hole b on the kick axle.
2. Install:
NOTE:
Slide the spring guide into the kick axle, make
sure the groove a in the spring guide fits on
the stopper of the torsion spring.
3. Install:
NOTE:
Apply the engine oil on the kick axle.
G
Slide the kick axle assembly into the crank-
G
case, make sure the clip 2 and kick axle
stopper b fit into their home positions a, c.
4. Hook:
NOTE:
Turn the torsion spring clockwise and hook
into the proper hole a in the crankcase.
4 - 56
Shift shaft 1
G
Kickstarter segment gear 1
G
Plain washer 2
G
Torsion spring 3
G
On kick axle 4.
Spring guide 1
G
Kick axle assembly 1
G
Torsion spring 1
G
ENG