Adding A Switch To An Encryption Group - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Adding a switch to an encryption group

The setup wizard allows you to either create a new encryption group, or add an encryption switch to
an existing encryption group. Use the following procedure to add a switch to an encryption group.
1. Select Configure > Encryption from the menu bar.
2. Select the switch to be to be added to the group. The switch must not already be in an
3. Select Switch > Create/Add to Group, or right-click the switch and select Create/Add to Group.
4. Click Next.
FIGURE 174
DCFM Professional Plus User Manual
53-1001774-01
The Encryption Center dialog box displays.
encryption group.
The Configure Switch Encryption welcome panel displays.
The Designate Switch Membership panel displays.
Add switch to an encryption group - Designate Switch Membership dialog box
a. Select Add this switch to an existing encryption group.
b. Click Next.
The Add Switch to Existing Encryption Group dialog box displays.
18
499