Creating A Traffic Class Map - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Creating a traffic class map

1. Select Configure > Switch > CEE from the menu bar.
2. Select a switch, and click Edit.
3. Click the QoS tab on the Edit Switch dialog box.
4. Select Traffic Class from the Map Type list.
5. Name the Traffic Class map.
6. Click the Traffic Class cell in a CoS row and directly enter a value from 0-7. You can leave the
7.
8. Click OK if the Traffic Class map does not already exist.
9. Review the changes carefully before you accept them.
10. Click Start to apply the changes, or click Close to abort the operation.
DCFM Professional Plus User Manual
53-1001774-01
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
The QoS dialog box displays.
cell empty to indicate zero (0).
Click the right arrow button to add the map to the Traffic Class Maps table.
If the name of the Traffic Class map already exists, an overwrite warning message displays.
Click Yes to overwrite the existing Traffic Class map.
The CEE Confirmation and Status dialog box displays.
15
379