Removing A User Account - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

13
FIGURE 100
4. Move events between the tables by selecting the event and clicking the appropriate arrow.
5. Set up advanced event filtering by clicking Advanced Filtering.
6. Click OK.
7.
8. Click OK to save your changes and close the Server Users dialog box.

Removing a user account

NOTE
You must have the User Management privilege to perform this task.
ATTENTION
You are prompted for confirmation before the user's account is removed. However, if users are
logged in when you remove their accounts, they receive a message that states that their client has
been disconnected. They are immediately logged out after they click OK on the message.
When you remove a user, the user is automatically removed from any resource groups to which it is
assigned.
To remove a user, complete the following steps.
1. Select Server > Users.
2. Select the user account you want to remove.
3. Click Remove.
326
Define Filter dialog box
For more information about advanced event filtering, refer to
filtering for a user" on page 274.
The Server Users dialog box displays.
Turn on event notification for the user by selecting the check box in the E-mail Notification
column of the Users table.
The Server Users dialog box displays.
"Setting up advanced event
DCFM Professional Plus User Manual
53-1001774-01