Saving A Historical Performance Graph Configuration - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

1. Select the type of ports from the Show list.
2. Right-click a device in the Available table and select Expand All.
3. Select the ports (press Ctrl or Shift and then click to select multiple ports) from which you want
4. Click OK.
Filtering data by time
To filter data for a historical performance graph by time, complete the following steps.
1. Select the Last option and enter the number of minutes, hours, or days.
2. Click OK.

Saving a historical performance graph configuration

To save a historical performance graph configuration, complete the following steps.
1. Select the device for which you want to generate a performance graph.
2. Choose one of the following options:
3. Filter the historical data by completing the following steps.
4. Select the number of results to display from the Display list.
5. Select the ports from which you want to gather performance data from the From list.
6. Select the historical period for which you want to gather performance data from the For list.
7.
8. Select the measure by which you want to gather performance data from the Measures list.
9. Enter a reference line value percentage for Tx% or Rx % Utilization.
10. Move the Row Height slider to the left to make the row height smaller or to the right to make it
11. Select the Display tabular data only check box to only show text with no graphs or icons.
DCFM Professional Plus User Manual
53-1001774-01
to gather performance data from the Available table and click the right arrow button.
The selected ports move to the Select Ports table.
OR
Select the From option and enter the date and time.
•
Select Monitor > Performance > Historical Graph.
OR
•
Right-click the device or fabric and select Performance > Historical Graph.
The Historical Performance Graph dialog box displays.
If you select Custom, you can not save the configuration.
If you select Custom, you can not save the configuration.
Select the granularity at which you want to gather performance data from the Granularity list.
To select more than one measure, click the Additional Measures expand arrows and select the
check box for each additional measure.
This field is only enabled when Tx% or Rx % Utilization is selected from the Measures list.
bigger.
11
299