Additional Software For Windows Managed Nodes (Data Protector Cell Server); Snmp Service (Required); Disk-Space Requirements - HP Data Protector A.06.11 Integration Manual

• The solution scales better. Additional Data Protector Cell Managers do not put
additional load on the management server because SNMP traps are processed
on the managed node.
• Any automatic action configured as a response to an SNMP trap can be triggered
and run locally on the managed node without involving the management server.
• Since SNMP traps are not sent from the managed node to the management
server, the network load decreases, and the probability that traps are lost is sig-
nificantly reduced. Security over public networks is also improved. The messages
are sent by the Operations Manager Agent to the Operations Manager Server
using either HTTPS or DCE.
Check the SNMP Emanate Agent is installed on the Data Protector Cell Manager
node:
# swlist -l product -a description OVSNMPAgent
You should see the following entry:
# OVSNMPAgent
OVSNMPAgent.MASTER
OVSNMPAgent.SUBAGT-HPUNIX
OVSNMPAgent.SUBAGT-MIB2
Additional software for Windows managed nodes (Data Protector
Cell Server)
The following required and optional software is not installed as part of the Operations
Manager Server installation nor as part of the Data Protector Integration installation.

SNMP service (required)

To send the Data Protector SNMP traps to the Operations Manager Server you must
install the Windows SNMP service.

Disk-space requirements

The following table lists disk space requirements for both the installation of the Data
Protector Integration and the Data Protector Integration's run-time files on the
Operations Manager Server and the OM managed node.
26 Installing the Data Protector Integration
B.11.00 HPUX_10.0_SNMP_Agent_Product
B.11.00
B.11.0
B.11.0
MASTER
SUBAGT-HPUNIX
SUBAGT-MIB2