Vrrp-Track-Interface Management Collaboration Configuration Example - HP 6125XLG Configuration Manual

# When the master route fails, the hosts in 20.1.1.0/24 can still communicate with the hosts in
30.1.1.0/24.
[SwitchA] ping -a 20.1.1.1 30.1.1.1
PING 30.1.1.1: 56
Reply from 30.1.1.1: bytes=56 Sequence=1 ttl=254 time=2 ms
Reply from 30.1.1.1: bytes=56 Sequence=2 ttl=254 time=1 ms
Reply from 30.1.1.1: bytes=56 Sequence=3 ttl=254 time=1 ms
Reply from 30.1.1.1: bytes=56 Sequence=4 ttl=254 time=2 ms
Reply from 30.1.1.1: bytes=56 Sequence=5 ttl=254 time=1 ms
--- 30.1.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/2 ms
# The output on Switch B is similar to that on Switch A. When the master route fails, the hosts in
30.1.1.0/24 can still communicate with the hosts in 20.1.1.0/24.
[SwitchB] ping -a 30.1.1.1 20.1.1.1
PING 20.1.1.1: 56
Reply from 20.1.1.1: bytes=56 Sequence=1 ttl=254 time=2 ms
Reply from 20.1.1.1: bytes=56 Sequence=2 ttl=254 time=1 ms
Reply from 20.1.1.1: bytes=56 Sequence=3 ttl=254 time=1 ms
Reply from 20.1.1.1: bytes=56 Sequence=4 ttl=254 time=1 ms
Reply from 20.1.1.1: bytes=56 Sequence=5 ttl=254 time=1 ms
--- 20.1.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/2 ms
VRRP-Track-interface management collaboration configuration
example
In this example, the master monitors the uplink interface.
Network requirements
As shown in
•
A is 10.1.1.10/24.
• Switch A and Switch B belong to VRRP group 1, whose virtual IP address is 10.1.1.10.
When Switch A operates correctly, packets from Host A to Host B are forwarded through Switch A.
•
When VRRP detects that a fault is on the uplink interface of Switch A through the interface
management module, packets from Host A to Host B are forwarded through Switch B.
data bytes, press CTRL_C to break
data bytes, press CTRL_C to break
Figure 32, Host A needs to access Host B on the Internet. The default gateway of Host
120