Display Link-Aggregation Load-Sharing Mode - HP 6125XLG Command Reference Manual

Table 14 Command output
Field
Actor System ID: 0x8000, 0000-fc00-6504
Related commands
lacp system-priority

display link-aggregation load-sharing mode

Use display link-aggregation load-sharing mode to display global or group-specific link-aggregation
load sharing criteria.
Syntax
display link-aggregation load-sharing mode [ interface [ bridge-aggregation interface-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
bridge-aggregation: Displays the load sharing criteria of the aggregation group that corresponds to the
specified aggregate interface.
interface-number: Specifies an existing aggregate interface number.
Usage guidelines
To display the global link-aggregation load sharing criteria, run the command without the interface
keyword.
To display all the group-specific load sharing criteria, run the command with the interface keyword, but
do not specify a particular interface.
To display the load sharing criteria of a particular aggregation group, perform the command with the
aggregate interface specified.
The bridge-aggregation keyword becomes available only after you create aggregate interfaces on the
device.
Examples
# Display the global link-aggregation load sharing criteria.
<Sysname> display link-aggregation load-sharing mode
Link-Aggregation Load-Sharing Mode:
Layer 2 traffic: packet type-based sharing
Layer 3 traffic: packet type-based sharing
# Display the link-aggregation load sharing criteria of the aggregation group that corresponds to
aggregate interface Bridge-Aggregation 10.
Description
Local system ID, which comprises the system LACP priority
(0x8000 in this sample output) and the system MAC address
(0000-FC00-6504 in this sample output).
71