Vpn-Instance (Radius Scheme View) - HP 6125G Command Reference Manual

If a RADIUS scheme defines that the username is sent without the ISP domain name, do not apply the
RADIUS scheme to more than one ISP domain, avoiding the confused situation where the RADIUS server
regards two users in different ISP domains but with the same userid as one.
For 802.1X users using EAP authentication, the user-name-format command configured for a RADIUS
scheme does not take effect and the switch does not change the usernames from clients before
forwarding them to the RADIUS server.
Related commands: radius scheme.
Examples
# Specify the switch to remove the domain name in the username sent to the RADIUS servers for the
RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] user-name-format without-domain

vpn-instance (RADIUS scheme view)

Syntax
vpn-instance vpn-instance-name
undo vpn-instance
View
RADIUS scheme view
Default level
2: System level
Parameters
vpn-instance-name: Name of the MPLS VPN, a case-sensitive string of 1 to 31 characters.
Description
Use vpn-instance to specify a VPN instance for a RADIUS scheme.
Use undo vpn-instance to remove the configuration.
The VPN instance specified here applies to all IPv4 servers in the RADIUS scheme for which no specific
VPN instance is specified. The VPN instance specified here is not effective for IPv6 RADIUS servers.
Related commands: display radius scheme.
Examples
# Specify VPN instance test for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] vpn-instance test
69