Domain - HP 6125G Command Reference Manual

Field
Lan-access authorization scheme
Lan-access accounting scheme
Domain User Template
Idle-cut
Self-service
Authorization attributes
User-profile

domain

Syntax
domain isp-name
undo domain isp-name
View
System view
Default level
3: Manage level
Parameters
isp-name: Specifies the ISP domain name, a case-insensitive string of 1 to 24 characters that cannot
contain slash (/), backslash (\), colon (:), asterisk (*), question mark (?), left angle bracket (<), right
angle bracket (>), quotation marks ("), vertical bar (|), or at sign (@).
Description
Use domain isp-name to create an ISP domain and enter ISP domain view.
Use undo domain to remove an ISP domain.
By default, there is a system predefined ISP domain named system in the system.
All ISP domains are in active state when they are created.
You cannot delete the system predefined ISP domain system, and can only modify its configuration.
To delete the ISP domain that is used as the default ISP domain, you must change it to a non-default ISP
domain first by using the undo domain default enable command.
Related commands: state and display domain.
Examples
# Create ISP domain test, and enter ISP domain view.
<Sysname> system-view
Description
Authorization method for LAN users.
Accounting method for LAN users.
Indicates some functions and attributes set for users in the domain.
Indicates whether the idle cut function is enabled. With the idle cut
function enabled for a domain, the system logs out any user in the
domain whose traffic is less than the specified minimum traffic
during the idle timeout period.
Indicates whether the self service function is enabled. With the self
service function enabled, users can launch a browser and enter the
self service URL in the address bar to access the self service pages
and perform self service operations.
Default authorization attributes for the ISP domain.
Default authorization user profile.
19