HP 6125G Command Reference Manual page 25

access type. To display connections of such users, use the display connection domain isp-name
command and specify the mandatory authentication domain.
How the switch displays the username of a user on an interface configured with a mandatory
authentication domain depends on the format of the username entered by the user at login:
If the username does not contain the character @, the switch displays the username in the format
•
username @mandatory authentication domain name.
• If the username contains the character @, the switch displays the entered username. For example,
if a user entered the username aaa@123 at login and the name of the mandatory authentication
domain is dom, the switch displays the username aaa@123, rather than aaa@123@dom.
For 802.1X users whose usernames use a slash (/) or backslash (\) as the domain name delimiter, you
cannot query the connections by username. For example, the display connection user-name aaa\bbb
command cannot display the connections of the user aaa\bbb.
Related commands: cut connection.
Examples
# Display information about all AAA user connections.
<Sysname> display connection
Slot: 1
Index=0
IP=10.0.0.1
IPv6=N/A
Total 1 connection(s) matched on slot 1.
Total 1 connection(s) matched.
#Display information about AAA user connections using the index of 0.
<Sysname> display connection ucibindex 0
Slot: 1
Index=0
IP=10.0.0.1
IPv6=N/A
Access=Admin
Port Type=Virtual ,Port Name=N/A
Initial VLAN=999, Authorized VLAN=20
ACL Group=Disable
User Profile=N/A
CAR=Disable
Priority=Disable
Start=2011-01-16 10:53:03 ,Current=2011-01-16 10:57:06 ,Online=00h04m03s
Total 1 connection matched.
Slot: 2
Total 0 connection matched.
Table 1 Command output
Field
Slot
Username
, Username=telnet@system
, Username=telnet@system
,AuthMethod=PAP
Description
IRF member device ID.
Username of the connection, in the format username@domain.
16