Self-Service-Url Enable; State (Isp Domain View) - HP 6125G Command Reference Manual

A NAS ID can be bound with more than one VLAN, but one VLAN can be bound with only one NAS ID.
If you bind a VLAN with different NAS IDs, only the last binding takes effect.
Related commands: aaa nas-id profile.
Examples
# Bind NAS ID 222 with VLAN 2.
<Sysname> system-view
[Sysname] aaa nas-id profile aaa
[Sysname-nas-id-prof-aaa] nas-id 222 bind vlan 2

self-service-url enable

Syntax
self-service-url enable url-string
undo self-service-url enable
View
ISP domain view
Default level
2: System level
Parameters
url-string: URL of the self-service server, a string of 1 to 64 characters. It must start with http:// and
contain no question mark. This URL was specified by the RADIUS server administrator during RADIUS
server installation.
Description
Use self-service-url enable to enable the self-service server location function and specify the URL of the
self-service server.
Use undo self-service-url enable to restore the default.
By default, the self-service server location function is disabled.
With the self-service function, users can manage and control their accounts and passwords. Only the
RADIUS server systems provided by IMC support the self-service function.
Examples
# For ISP domain test, enable the self-service server location function and specify the URL of the
self-service server for changing user password to http://10.153.89.94/selfservice.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] self-service-url enable http://10.153.89.94/selfservice

state (ISP domain view)

Syntax
state { active | block }
undo state
22