Port-Security Trap - HP 6125G Command Reference Manual

Description
Use port-security timer disableport to set the silence period during which the port remains disabled.
Use undo port-security timer disableport to restore the default.
By default, the silence period is 20 seconds.
If you configure the intrusion protection policy as disabling the port temporarily whenever it receives an
illegal frame, use this command to set the silence period.
Related commands: display port-security.
Examples
# Configure the intrusion protection policy as disabling the port temporarily whenever it receives an
illegal frame and set the silence period to 30 seconds.
<Sysname> system-view
[Sysname] port-security timer disableport 30
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port-security intrusion-mode disableport-temporarily

port-security trap

Syntax
port-security trap { addresslearned | dot1xlogfailure | dot1xlogoff | dot1xlogon | intrusion |
ralmlogfailure | ralmlogoff | ralmlogon }
undo port-security trap { addresslearned | dot1xlogfailure | dot1xlogoff | dot1xlogon | intrusion |
ralmlogfailure | ralmlogoff | ralmlogon }
View
System view
Default level
2: System level
Parameters
addresslearned: Enables MAC address learning traps. The port security module sends traps when a port
learns a new MAC address.
dot1xlogfailure: Enables 802.1X authentication failure traps. The port security module sends traps when
an 802.1X authentication fails.
dot1xlogon: Enables 802.1X authentication success traps. The port security module sends traps when an
802.1X authentication is passed.
dot1xlogoff: Enables 802.1X user logoff event traps. The port security module sends traps when an
802.1X user is logged off.
intrusion: Enables intrusion traps. The port security module sends traps when it detects illegal frames.
ralmlogfailure: Enables MAC authentication failure traps. The port security module sends traps when a
MAC authentication fails.
ralmlogoff: Enables MAC authentication user logoff traps. The port security module sends traps when a
MAC authentication user is logged off.
140