View
ISP domain view
Default level
2: System level
Parameters
active: Places the ISP domain in active state to allow the users in the ISP domain to request network
services.
block: Places the ISP domain in blocked state to prevent users in the ISP domain from requesting network
services.
Description
Use state to set the status of an ISP domain.
Use undo state to restore the default.
By default, an ISP domain is in active state.
By blocking an ISP domain, you disable users of the domain that are offline from requesting network
services. The online users are not affected.
Examples
# Place the current ISP domain test to the state of blocked.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] state block
Local user configuration commands
access-limit
Syntax
access-limit max-user-number
undo access-limit
View
Local user view
Default level
3: Manage level
Parameters
max-user-number: Maximum number of concurrent users of the current local user account, in the range of
1 to 1024.
Description
Use access-limit to limit the number of concurrent users of a local user account.
Use undo access-limit to remove the limitation.
By default, there is no limit to the number of users who concurrently use the same local user account.
23