Sftp Ipv6 - HP 6125G Command Reference Manual

<Sysname> system-view
[Sysname] sftp client source ip 192.168.0.1

sftp ipv6

Syntax
sftp ipv6 server [ port-number ] [ identity-key { dsa | rsa } | prefer-ctos-cipher { 3des | aes128 | des }
| prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange | dh-group1
| dh-group14 } | prefer-stoc-cipher { 3des | aes128 | des } | prefer-stoc-hmac { md5 | md5-96 | sha1
| sha1-96 } ] *
View
User view
Default level
3: Manage level
Parameters
server: Specifies an IPv6 address or host name of the server, a case-insensitive string of 1 to 46
characters.
port-number: Specifies the port number of the server, in the range of 0 to 65535. The default is 22.
identity-key: Specifies the algorithm for publickey authentication, either dsa or rsa. The default is dsa.
prefer-ctos-cipher: Specifies the preferred encryption algorithm from client to server, defaulted to aes128.
• 3des: Specifies the encryption algorithm 3des-cbc.
aes128: Specifies the encryption algorithm aes128-cbc.
•
des: Specifies the encryption algorithm des-cbc.
•
prefer-ctos-hmac: Specifies the preferred HMAC algorithm from client to server, defaulted to sha1-96.
md5: Specifies the HMAC algorithm hmac-md5.
•
• md5-96: Specifies the HMAC algorithm hmac-md5-96.
sha1: Specifies the HMAC algorithm hmac-sha1.
•
• sha1-96: Specifies the HMAC algorithm hmac-sha1-96.
prefer-kex: Specifies the preferred key exchange algorithm, defaulted to dh-group-exchange.
dh-group-exchange: Specifies the key exchange algorithm diffie-hellman-group-exchange-sha1.
•
dh-group1: Specifies the key exchange algorithm diffie-hellman-group1-sha1.
•
dh-group14: Specifies the key exchange algorithm diffie-hellman-group14-sha1.
•
prefer-stoc-cipher: Specifies the preferred encryption algorithm from server to client, defaulted to
aes128.
prefer-stoc-hmac: Specifies the preferred HMAC algorithm from server to client, defaulted to sha1-96.
Description
Use sftp ipv6 to establish a connection to a remote IPv6 SFTP server and enter SFTP client view.
When the server adopts publickey authentication to authenticate a client, the client needs to get the local
private key for digital signature. As the publickey authentication uses either RSA or DSA algorithm, you
must specify an algorithm for the client (by using the identity-key keyword) in order to get the correct data
for the local private key.
229