Port-Security Mac-Address Security - HP 6125G Command Reference Manual

You can display dynamic secure MAC addresses by using the display port-security mac-address security
command.
Related commands: display port-security mac-address security, mac-address dynamic.
Examples
# Enable the dynamic secure MAC function on interface GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet1/0/1
[Sysname-GigabitEthernet1/0/1] port-security mac-address dynamic

port-security mac-address security

Syntax
In Layer 2 Ethernet interface view:
port-security mac-address security [ sticky ] mac-address vlan vlan-id
undo port-security mac-address security [ sticky ] mac-address vlan vlan-id
In system view:
port-security mac-address security [ sticky ] mac-address interface interface-type interface-number vlan
vlan-id
undo port-security mac-address security [ [ mac-address [ interface interface-type interface-number ] ]
vlan vlan-id ]
View
Layer 2 Ethernet interface view, system view
Default level
2: System level
Parameters
sticky: Specifies a sticky MAC address. If you do not provide this keyword, the command configures a
static secure MAC address.
mac-address: Secure MAC address, in the H-H-H format.
interface interface-type interface-number: Specifies a Layer 2 Ethernet port by its type and number.
vlan vlan-id: Specifies the VLAN that has the secure MAC address. The vlan-id argument represents the
ID of the VLAN in the range of 1 to 4094. Make sure that you have assigned the Layer 2 port to the
specified VLAN.
Description
Use port-security mac-address security to add a secure MAC address.
Use undo port-security mac-address security to remove a secure MAC address.
By default, no secure MAC address entry is configured.
Secure MAC addresses are MAC addresses configured or learned in autoLearn mode. They can survive
link down/up events, and once saved, can survive a device reboot. You can bind a MAC address to only
one port in a VLAN.
133