Display Local-User - HP 6125G Command Reference Manual

Security command reference
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

View
Local user view
Default level
3: Manage level
Parameters
ip ip-address: Specifies the IP address of the user. This option applies only to 802.1X users.
location port slot-number subslot-number port-number: Specifies the port to which the user is bound,
where slot-number is in the range of 0 to 255, subslot-number is in the range of 0 to 15, and port-number
is in the range of 0 to 255. This option applies only to LAN users.
mac mac-address: Specifies the MAC address of the user in the format H-H-H. This option applies only to
LAN users.
vlan vlan-id: Specifies the VLAN to which the user belongs, where vlan-id is in the range of 1 to 4094.
This option applies only to LAN users.
Description
Use bind-attribute to configure binding attributes for a local user.
Use undo bind-attribute to remove binding attributes of a local user.
By default, no binding attribute is configured for a local user.
Binding attributes are checked upon authentication of a local user. If the binding attributes of a local user
do not match the configured ones, the user fails the checking and the authentication.
Binding attribute checking does not take the service types of the users into account. A configured binding
attribute is effective for all types of users. Be cautious when deciding which binding attributes should be
configured for which type of local users. For example, an IP address binding applies only to 802.1X
authentication that supports IP address upload. If you configure an IP address binding for an
authentication method that does not support IP address upload, for example, MAC authentication, the
local authentication fails.
Examples
# Configure the bound IP of local user abc as 3.3.3.3.
<Sysname> system-view
[Sysname] local-user abc
[Sysname-luser-abc] bind-attribute ip 3.3.3.3

display local-user

Syntax
display local-user [ idle-cut { disable | enable } | service-type { ftp | lan-access | ssh | telnet | terminal
| web } | state { active | block } | user-name user-name | vlan vlan-id ] [ slot slot-number ] [ | { begin
| exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
26

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents