Server-Type; State Primary - HP 6125G Command Reference Manual

[Sysname] radius scheme radius1
[Sysname-radius-radius1] security-policy-server 10.110.1.2

server-type

Syntax
server-type { extended | standard }
undo server-type
View
RADIUS scheme view
Default level
2: System level
Parameters
extended: Specifies the extended RADIUS server (generally running on IMC), which requires the RADIUS
client and RADIUS server to interact according to the procedures and packet formats provisioned by the
proprietary RADIUS protocol.
standard: Specifies the standard RADIUS server, which requires the RADIUS client and RADIUS server to
interact according to the procedures and packet format of the standard RADIUS protocol (RFC 2865 and
2866 or their successors).
Description
Use server-type to configure the RADIUS server type.
Use undo server-type to restore the default.
By default, the supported RADIUS server type is standard.
Examples
# Configure the RADIUS server type of RADIUS scheme radius1 as standard.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] server-type standard

state primary

Syntax
state primary { accounting | authentication } { active | block }
View
RADIUS scheme view
Default level
2: System level
Parameters
accounting: Sets the status of the primary RADIUS accounting server.
authentication: Sets the status of the primary RADIUS authentication/authorization server.
active: Specifies the active state, the normal operation state.
63