Service-Type - HP 6125G Command Reference Manual

password: Specifies the password string. This argument is case sensitive. If simple is specified, it must be
a string of 1 to 63 characters. If cipher is specified, it must be a ciphertext string of 1 to 1 17 characters.
Description
Use password to configure a password for a local user.
Use undo password to delete the password of a local user.
If none of the parameters is specified, you enter the interactive mode to set a plaintext password. The
interactive mode is supported only on switches that support the password control feature. For more
information about password control commands, see Security Command Reference.
When the password control feature is globally enabled by using the password-control enable command,
local user passwords, such as the length and complexity, are under the restriction of the password control
feature, and are not displayed.
For secrecy, all passwords, including passwords configured in plain text, are saved in cipher text.
Related commands: display local-user.
Examples
# Set the password of local user user1 to 123456 in plain text.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1] password simple 123456
# Set the password of local user user1 to 123456 in interactive mode.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1] password
Password:******
Confirm :******

service-type

Syntax
service-type { ftp | lan-access | { ssh | telnet | terminal } * | web }
undo service-type { ftp | lan-access | { ssh | telnet | terminal } * | web }
View
Local user view
Default level
3: Manage level
Parameters
ftp: Authorizes the user to use the FTP service. The user can use the root directory of the FTP server by
default.
lan-access: Authorizes the user to use the LAN access service. Such users are mainly Ethernet users, for
example, 802.1X users.
ssh: Authorizes the user to use the SSH service.
telnet: Authorizes the user to use the Telnet service.
33