Crl Check; Crl Update-Period - HP 6125G Command Reference Manual

By default, no country code is specified.
Examples
# Set the country code of an entity to CN.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] country CN

crl check

Syntax
crl check { disable | enable }
View
PKI domain view
Default level
2: System level
Parameters
disable: Disables CRL checking.
enable: Enables CRL checking.
Description
Use crl check to enable or disable CRL checking.
By default, CRL checking is enabled.
CRLs are files issued by the CA to publish all certificates that have been revoked. Revocation of a
certificate might occur before the certificate expires. CRL checking is intended for checking whether a
certificate has been revoked. A revoked certificate is no longer trusted.
Examples
# Disable CRL checking.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] crl check disable

crl update-period

Syntax
crl update-period hours
undo crl update-period
View
PKI domain view
Default level
2: System level
Parameters
hours: CRL update period in hours, in the range of 1 to 720.
179