HP 6125G Command Reference Manual page 24

View
Any view
Default level
1: Monitor level
Parameters
access-type: Specifies the user connections of the specified access type.
dot1x: Indicates 802.1X authentication.
•
mac-authentication: Indicates MAC address authentication.
•
domain isp-name: Specifies the user connections of an ISP domain. The isp-name argument refers to the
name of an existing ISP domain and is a case-insensitive string of 1 to 24 characters.
interface interface-type interface-number: Specifies the user connections on an interface. Only Layer 2
Ethernet interfaces are supported.
ip ip-address: Specifies the user connections of an IP address.
mac mac-address: Specifies the user connections of a MAC address, with mac-address in the format
H-H-H.
ucibindex ucib-index: Specifies the user connection that uses the connection index. The value range is
from 0 to 4294967295.
user-name user-name: Specifies the user connections that use the username. The user-name argument is
a case-sensitive string of 1 to 80 characters. For a username entered without a domain name, the system
assumes that the user is in the default domain name or the mandatory authentication domain.
vlan vlan-id: Specifies the user connections of a VLAN, with vlan-id ranging from 1 to 4094.
slot slot-number: Specifies the user connections on an IRF member device. The slot-number argument
represents the ID of the IRF member device. The value range for the argument depends on the number of
member devices and their member IDs in the IRF fabric.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display connection to display information about AAA user connections.
This command does not display information about FTP user connections.
With no parameter specified, this command displays brief information about all AAA user connections.
If you specify the ucibindex ucib-index option, this command displays detailed information. Otherwise,
this command displays brief information.
If an interface is configured with a mandatory authentication domain (for example, an 802.1X
mandatory authentication domain), the switch uses the mandatory authentication domain to perform
authentication, authorization, and accounting for users who access the interface through the specified
15