Password-Control { Aging | Composition | History | Length } Enable - HP 6125G Command Reference Manual

View
Local user view
Default level
2: System level
Parameters
None
Description
Use password to set a password for a local user in interactive mode.
Use undo password to remove the password for a local user.
Valid characters for a local user password include uppercase letters A to Z; lowercase letters a to z;
numbers 0 to 9; 32 special characters: blank space, tilde (~), back quote (`), exclamation point (!), at
sign (@), pound sign (#), dollar sign ($), percent sign (%), caret (^), ampersand sign (&), asterisk (*), left
parenthesis ("("), right parenthesis (")"), underscore (_), plus sign (+), minus sign (-), equal sign (=), left
brace ({), right brace (}), vertical bar (|), left bracket ([), right bracket (]), back slash (\), colon (:),
quotation marks ("), semi-colon (;), apostrophe ('), left angle bracket (<), right angle bracket (>), comma
(,), dot (.), and slash (/).
A local user password configured in interactive mode must satisfy the password control requirement. For
example, if the minimum password length is set to 8, the password must contain at least eight characters.
Examples
# Set a password for local user test in interactive mode.
<Sysname> system-view
[Sysname] local-user test
[Sysname-luser-test] password
Password:**********
Confirm :**********
Updating user(s) information, please wait....
password-control { aging | composition | history | length }
enable
Syntax

password-control { aging | composition | history | length } enable

undo password-control { aging | composition | history | length } enable
View
System view
Default level
2: System level
Parameters
aging: Enables the password aging function.
composition: Enables the password composition restriction function.
history: Enables the password history control function.
148