Display Domain - HP 6125G Command Reference Manual

Field
MAC
IP
IPv6
Access
ACL Group
User Profile
CAR(kbps)
UpPeakRate
DnPeakRate
UpAverageRate
DnAverageRate

display domain

Syntax
display domain [ isp-name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
isp-name: Name of an existing ISP domain, a string of 1 to 24 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display domain to display the configuration of ISP domains.
If you do not specify any ISP domain, the command displays the configuration of all ISP domains.
Related commands: access-limit enable, domain, and state.
Examples
# Display the configuration of all ISP domains.
<Sysname> display domain
0 Domain : system
Description
MAC address of the user.
IPv4 address of the user.
IPv6 address of the user.
User access type.
Authorization ACL group. If no authorization ACL group is assigned, this field
displays Disable.
Authorization user profile.
Authorized CAR parameters.
Uplink peak rate.
Downlink peak rate.
Uplink average rate.
Downlink average rate.
17