Vpn-Instance (Radius Scheme View); Hwtacacs Commands; Data-Flow-Format (Hwtacacs Scheme View) - HP 6125XLG Command Reference Manual

vpn-instance (RADIUS scheme view)

Use vpn-instance to specify a VPN for a RADIUS scheme.
Use undo vpn-instance to remove the configuration.
Syntax
vpn-instance vpn-instance-name
undo vpn-instance
Default
The RADIUS scheme belongs to the public network.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
vpn-instance-name: Name of the MPLS L3VPN, a case-sensitive string of 1 to 31 characters.
Usage guidelines
The VPN specified here applies to all servers in the RADIUS scheme for which no VPN is specified.
Examples
# Specify VPN test for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] vpn-instance test
Related commands
display radius scheme

HWTACACS commands

data-flow-format (HWTACACS scheme view)

Use data-flow-format to set the data flow and packet measurement units for traffic statistics.
Use undo data-flow-format to restore the default.
Syntax
data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet { giga-packet |
kilo-packet | mega-packet | one-packet } } *
undo data-flow-format { data | packet }
Default
Traffic is counted in bytes and packets.
55