Retry - HP 6125G Command Reference Manual

Security command reference
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

slot slot-number: Clears the stop-accounting requests buffered for an IRF member device. The slot-number
argument represents the ID of the IRF member device. The value range for the argument depends on the
number of member devices and their member IDs in the IRF fabric.
Description
Use reset stop-accounting-buffer to clear the buffered stop-accounting requests for which no responses
have been received.
Related commands: stop-accounting-buffer enable and display stop-accounting-buffer.
Examples
# Clear the stop-accounting requests buffered for user user0001@test.
<Sysname> reset stop-accounting-buffer user-name user0001@test
# Clear the stop-accounting requests buffered in the time range from 0:0:0 to 23:59:59 on March 31,
201 1.
<Sysname> reset stop-accounting-buffer time-range 0:0:0-03/31/2011 23:59:59-03/31/2011

retry

Syntax
retry retry-times
undo retry
View
RADIUS scheme view
Default level
2: System level
Parameters
retry-times: Maximum number of RADIUS packet transmission attempts, in the range of 1 to 20.
Description
Use retry to set the maximum number of attempts for transmitting a RADIUS packet to a single RADIUS
server.
Use undo retry to restore the default.
By default, the maximum number of RADIUS packet transmission attempts is 3.
Because RADIUS uses UDP packets to transmit data, the communication is not reliable. If the switch does
not receive a response to its request from the RADIUS server within the response timeout period, it
retransmits the RADIUS request. If the number of transmission attempts exceeds the limit but the switch still
receives no response from the RADIUS server, the switch considers the request a failure.
The maximum number of packet transmission attempts multiplied by the RADIUS server response timeout
period cannot be greater than 75.
Related commands: radius scheme and timer response-timeout.
Examples
# Set the maximum number of RADIUS request transmission attempts to 5 for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
56

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents