HP 6125G Command Reference Manual page 181

View
System view
Default level
2: System level
Parameters
keyname: Specifies a public key name, a case-sensitive string of 1 to 64 characters.
filename: Specifies the name of the file that saves the peer host public key. For more information about
file name, see Fundamentals Configuration Guide.
Description
Use public-key peer import sshkey to import a peer host public key from the public key file.
Use undo public-key peer to remove the specified peer host public key.
After execution of this command, the system automatically transforms the peer host public key to the PKCS
format, and imports the key. This operation requires that you get a copy of the public key file from the
peer device through FTP or TFTP in binary mode in advance.
The device supports importing public keys in the format of SSH1.5, SSH2.0, and OpenSSH.
Related commands: display public-key peer.
Examples
# Import the peer host public key named key2 from the public key file key.pub.
<Sysname> system-view
[Sysname] public-key peer key2 import sshkey key.pub
172