Display Arp Anti-Attack Source-Mac - HP 6125G Command Reference Manual

display arp anti-attack source-mac

Syntax
display arp anti-attack source-mac { slot slot-number | interface interface-type interface-number } [ |
{ begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Displays attacking MAC addresses detected on the interface.
slot slot-number: Displays attacking MAC addresses detected on a specified IRF member switch. The
slot-number argument specifies the ID of an IRF member switch. The value range for the argument
depends on their member IDs in the IRF fabric, which you can display with the display irf command. On
a standalone device, the slot-number argument specifies the ID of the switch.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display arp anti-attack source-mac to display attacking MAC addresses detected by source MAC
address based ARP attack detection.
If no interface is specified, the display arp anti-attack source-mac command displays attacking MAC
addresses detected on all the interfaces.
Examples
# Display the attacking MAC addresses detected by source MAC address based ARP attack detection.
Display the attacking MAC addresses detected by source MAC address based ARP attack detection.
<Sysname> display arp anti-attack source-mac slot 1
Source-MAC
23f3-1122-3344
23f3-1122-3355
23f3-1122-33ff
23f3-1122-33ad
23f3-1122-33ce
VLAN ID Interface
4094 GE1/0/1
4094 GE1/0/2
4094 GE1/0/3
4094 GE1/0/4
4094 GE1/0/5
257
Aging-time
10
30
25
30
2