Rule (Pki Cert Acp View); State - HP 6125G Command Reference Manual

rule (PKI CERT ACP view)

Syntax
rule [ id ] { deny | permit } group-name
undo rule { id | all }
View
PKI certificate access control policy view
Default level
2: System level
Parameters
id: Number of the certificate attribute access control rule, in the range of 1 to 16. The default is the
smallest unused number in this range.
deny: Indicates that a certificate whose attributes match an attribute rule in the specified attribute group
is considered invalid and denied.
permit: Indicates that a certificate whose attributes match an attribute rule in the specified attribute group
is considered valid and permitted.
group-name: Name of the certificate attribute group to be associated with the rule, a case-insensitive
string of 1 to 16 characters. It cannot be a, al, or all.
all: Specifies all access control rules.
Description
Use rule to create a certificate attribute access control rule.
Use undo rule to delete access control rules.
By default, no access control rule exists.
A certificate attribute group must exist to be associated with a rule.
Examples
# Create an access control rule, specifying that a certificate is considered valid when it matches an
attribute rule in certificate attribute group mygroup.
<Sysname> system-view
[Sysname] pki certificate access-control-policy mypolicy
[Sysname-pki-cert-acp-mypolicy] rule 1 permit mygroup

state

Syntax
state state-name
undo state
View
PKI entity view
Default level
2: System level
196