Timer Response-Timeout (Hwtacacs Scheme View) - HP 6125G Command Reference Manual

Parameters
minutes: Real-time accounting interval in minutes, zero or a multiple of 3 in the range of 3 to 60. A value
of zero means "Do not send online user accounting information to the HWTACACS server."
Description
Use timer realtime-accounting to set the real-time accounting interval.
Use undo timer realtime-accounting to restore the default.
By default, the real-time accounting interval is 12 minutes.
For real-time accounting, a NAS must transmit the accounting information of online users to the
HWTACACS accounting server periodically. This command is for setting the interval.
Consider the performance of the NAS and the HWTACACS server when you set the real-time accounting
interval. A shorter interval requires higher performance. Use a longer interval when there are a large
number of users (more than 1000, inclusive).
Table 9 Recommended real-time accounting intervals
Number of users
1 to 99
100 to 499
500 to 999
1000 or more
Examples
# Set the real-time accounting interval to 51 minutes for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer realtime-accounting 51

timer response-timeout (HWTACACS scheme view)

Syntax
timer response-timeout seconds
undo timer response-timeout
View
HWTACACS scheme view
Default level
2: System level
Parameters
seconds: HWTACACS server response timeout period in seconds, in the range of 1 to 300.
Description
Use timer response-timeout to set the HWTACACS server response timeout timer.
Use undo timer response-timeout to restore the default.
Real-time accounting interval (minutes)
3
6
12
15 or more
87