Key (Hwtacacs Scheme View) - HP 6125G Command Reference Manual

Description
Use hwtacacs scheme to create an HWTACACS scheme and enter HWTACACS scheme view.
Use undo hwtacacs scheme to delete an HWTACACS scheme.
By default, no HWTACACS scheme exists.
An HWTACACS scheme can be referenced by more than one ISP domain at the same time.
An HWTACACS scheme referenced by ISP domains cannot be removed.
Examples
# Create an HWTACACS scheme named hwt1 and enter HWTACACS scheme view.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1]

key (HWTACACS scheme view)

Syntax
key { accounting | authentication | authorization } [ cipher | simple ] key
undo key { accounting | authentication | authorization }
View
HWTACACS scheme view
Default level
2: System level
Parameters
accounting: Sets the shared key for secure HWTACACS accounting communication.
authentication: Sets the shared key for secure HWTACACS authentication communication.
authorization: Sets the shared key for secure HWTACACS authorization communication.
cipher: Sets a ciphertext shared key.
simple: Sets a plaintext shared key.
key: Specifies the shared key string. This argument is case sensitive. If simple is specified, it must be a
string of 1 to 255 characters. If cipher is specified, it must be a ciphertext string of 1 to 373 characters.
If neither cipher nor simple is specified, you set a plaintext shared key string.
Description
Use key to set the shared key for secure HWTACACS authentication, authorization, or accounting
communication.
Use undo key to remove the configuration.
By default, no shared key is configured.
The shared keys configured on the switch must match those configured on the HWTACACS servers.
For secrecy, all shared keys, including shared keys configured in plain text, are saved in cipher text.
Related commands: display hwtacacs.
76