Ssh Server Rekey-Interval - HP 6125G Command Reference Manual

View
System view
Default level
2: System level
Parameters
dscp-value: Specifies the DSCP value in the IPv6 packets sent by the SSH server, which ranges from 0 to
63.
Description
Use ssh server ipv6 dscp to set the DSCP value for IPv6 packets sent by the SSH server.
Use undo ssh server ipv6 dscp to restore the default.
By default, the DSCP value in IPv6 packets sent by the SSH server is 0.
Examples
# Set the DSCP value to 30 for IPv6 packets sent by the SSH server.
<Sysname> system-view
[Sysname] ssh server ipv6 dscp 30

ssh server rekey-interval

Syntax
ssh server rekey-interval hours
undo ssh server rekey-interval
View
System view
Default level
3: Manage level
Parameters
hours: Specifies an interval (in hours ) for updating the server key pair, in the range of 1 to 24.
Description
Use ssh server rekey-interval to set the interval for updating the RSA server key.
Use undo ssh server rekey-interval to restore the default.
By default, the update interval of the RSA server key is 0, and the RSA server key is not updated.
Periodically updating the RSA server key can prevent malicious hacking of the key and enhance security
of the SSH connections.
This command is only available to SSH users using SSH1 client software.
The system does not update any DSA key pair periodically.
Related commands: display ssh server.
Examples
# Set the RSA server key pair update interval to 3 hours.
<Sysname> system-view
204