HP 6125G Command Reference Manual page 133

Security command reference
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

RALM logoff trap is enabled
RALM logfailure trap is enabled
AutoLearn aging time is 1 minutes
Disableport Timeout: 20s
OUI value:
Index is 1,
OUI value is 000d1a
Index is 2,
OUI value is 003c12
GigabitEthernet1/0/1 is link-down
Port mode is userLoginWithOUI
NeedToKnow mode is NeedToKnowOnly
Intrusion Portection mode is DisablePort
Max MAC address number is 50
Stored MAC address number is 0
Authorization is ignored
Security MAC address learning mode is sticky
Security MAC address aging type is absolute
GigabitEthernet1/0/2 is link-down
Port mode is noRestriction
NeedToKnow mode is disabled
Intrusion mode is NoAction
Max MAC address number is not configured
Stored MAC address number is 0
Authorization is permitted
Security MAC address learning mode is sticky
Security MAC address aging type is absolute
Table 12 Command output
Field
Equipment port-security
AddressLearn trap
Intrusion trap
Dot1x logon trap
Dot1x logoff trap
Dot1x logfailure
RALM logon trap
RALM logoff trap
Description
Whether the port security is enabled or not.
Whether trapping for MAC address learning is enabled or not. If it is enabled,
the port sends trap information after it learns a new MAC address.
Whether trapping for intrusion protection is enabled or not. If it is enabled, the
port sends trap information after it detects illegal packets.
Whether trapping for 802.1X logon is enabled or not. If it is enabled, the port
sends trap information after a user passes 802.1X authentication.
Whether trapping for 802.1X logoff is enabled or not. If it is enabled, the port
sends trap information after an 802.1X user logs off.
Whether trapping for 802.1X authentication failure is enabled or not. If it is
enabled, the port sends trap information after a user fails 802.1X
authentication.
Whether trapping for MAC authentication success is enabled or not. If it is
enabled, the port sends trap information when a user passes MAC address
authentication.
Whether trapping for MAC authenticated user logoff is enabled or not. If it is
enabled, traps are sent when a MAC address authenticated user logs off.
124

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents