Oce Arizona 200 GT User Manual page 77

How to Power Off
Turn the AC power switch to the OFF position.
1.
Close the vacuum shut-off valves on top of the Carriage ink reservoir to prevent the
2.
ink from draining out and filling the waste tray.
[47]
[47] Vacuum Shutoff Valves (Magenta, Yellow are Off - Black, Cyan still ON)
Open the vacuum shutoff valves again when the power is turned back on.
3.
Note: Extended Power Off
If the power is switched off for only a short period (for example, when the printer is
shut down and then immediately restarted to correct an electrical problem), it is not
necessary close the ink valves. However, if it is necessary to turn off the power for
an extended period, then close all of the ink valves to prevent the ink from draining.
Also if the printer is powered off for more than one day, perform a Printhead
Maintenance and Swab the heads before power is turned off.
How to Lock Out the Power Switch
Attention: Some simple maintenance and service procedures require locking
out the On/Off switch to ensure operator safety. When the switch is locked out,
it is impossible to supply power to the printer.
Turn the AC power switch to the Off position.
1.
Apply a lock and a tag-out label to the Lock-out area of the switch for the duration
2.
of any service or maintenance procedures.
Close the shutoff valves on top of the Carriage ink reservoir to prevent the ink from
3.
draining into the maintenance Station.
Open the shutoff valves again when the power is turned back on.
4.
When maintenance or service is complete, remove the lock and tag-out label and turn
5.
the AC power switch to the On position.
How to Power the Printer On and Off
77