Oce Arizona 200 GT User Manual page 76

How to Power the Printer On and Off
[46]
[46] AC Power Switch
The splash screen will show some further initialization messages and then the initial
6.
Job Control module screen appears. The initialization is complete when the top left
panel of the display shows "Ready". Your printer is now ready for use.
Attention: After powering the printer On, leave it running continuously, even
when at idle. Failure to leave the printer powered on may result in ink draining
out of the ink reservoirs.
Note: The printer is designed to be left powered ON at all times as only minimal
power is consumed when the printer is idle.
76 Chapter 5 How to Operate the Arizona 200/250 GT