Oce Arizona 200 GT User Manual page 104

Roll Media Option Specifications
Maximum Media Thickness
This value is not officially specified. It is theoretically possible for the RMO system
to accommodate media up to 3mm (0.11 inches). However, most media at or near
that thickness will have problems in the transport mechanism of the RMO unit.
Maximum Supported Weight
[34]
Media Width (mm)
900 x < 1220
1220 x < 1480
1480 x < 1780
1780 x 2200
Leader & End of Roll Waste
Leader Waste: 560mm (22 inches)
Leader waste is the amount of media that cannot be printed between the roll media
platen and the take-up media roll. This waste is produced every time media is loaded,
taped to the take-up core and initialized in preparation for the first print. Trailer
waste is the media that cannot be printed at the end of the supply media roll. This
will vary slightly depending on the attachment method that was used to secure the
media to the media core.
End of Roll Waste (minimum possible): 920mm (36 inches)
End of roll waste is the media that cannot be printed at the end of the supply media
roll. This will vary slightly depending on the attachment method that was used to
secure the media to the media core.
104 Chapter 6 How to Operate the Roll Media Option
Max. Weight kg (lbs)
28 (62)
40 (88)
45 (100)
50 (110)