Oce Arizona 200 GT User Manual page 67

problems. One situation that would require changes is if your network does not use
DHCP to automatically obtain network settings. In this case network settings have
to be entered manually. If you don't know how to do this, bring in a network
consultant to determine what the setting must be for the network (alternately, you
can purchase a DHCP router for your network that will automatically supply the
network settings).
Network Name
Printer Description
Network Adapter Name
MAC Address
Network Status
Use DHCP
IP Address
Subnet Mask
Default Gateway
Note: If the Ethernet network cable is disconnected, you will not be able to set up
the DHCP or the Static Network Address.
Note: A network name for the printer cannot consist of numeric characters only - it
must be a mix of alpha-numeric characters.
If the Printer name is changed, the printer must be restarted for the change to take
effect.
User Interface Settings
[26]
[41]
[41] User Interface
Languages Supported
The user interface can be set to display the following languages:
English - US
English - UK
German
Settings Module
67