Oce Arizona 200 GT User Manual page 57

Components of the Print Job Control Module
[20]
[20] Job Control Panels
Component
1) Job and Printer
Status
2) Printer
Messages Panel
3) Pause/Resume
and the Ink System
Status
4) Command
Toolbar left
5) Command
Toolbar right
6) Active Jobs List Displays a list of all Active print jobs.
7) Job Placement
Preview
8) Inactive Jobs
9) Job Information
and Parameters
panel.
10) Interface Tabs
11) Software
Version Number
and Image Upload
Progress
Job Control Components Explained
1) Job and Printer Status Panel
The job status panel is in the top left corner of the display screen. It shows
information about the current state of the printer or job activities.
Printer Status
Job name currently printing
Total copies, number of printed copies and copy progress
Overprint progress and number of overprints if more than zero
Function
Displays the status and progress of print jobs
Displays the last four lines of the log - click in this area to see
more of the log.
To the right is the print job Pause/Resume button and
the Ink System Status icon - click to view an ink status report.
Displays icons for actions related to the print jobs and control
of the printer.
Displays icons for ink temperature, lamp control, start print
jobs, and print a nozzle check.
Displays the selected print job with a preview that shows the
placement of that job on the printer.
Displays a list of all Inactive print jobs.
This panel shows the parameters of the currently selected
print job and also allows changes to the parameters associated
with that job .
Use these tabs to select the different modules of the printer
user interface.
Displays the current installed version of the printer software.
The image upload progress panel indicates the name of a
print job that is currently uploading to the printer. This panel
is not always visible and appears only when an image is
loading to the printer. It is located below the software version
number when it is active.
Print Job Control Module
57