Open the media access door at the top of the Roll Media unit, then reach down
6.
through the open door to grasp the media and feed it up and over the take-up roll.
[65]
[65] Feed Media Through Access Door
Check alignment of the media by feeding it down to the supply roll and make sure
7.
that the edge lines up with the edge of the supply roll.
[66]
[66] Line Up Edge of Media to the Supply Roll
Rewind the media by continually pressing down the left foot pedal until it is
8.
positioned where it can be taped to the take-up core.
How to Load Media
115