Table of Contents
Advertisement
66
en | Installing a Pipe Mount
7
Installing a Pipe Mount
7.1
Description
This chapter details how to mount the AutoDome Junior to a
pipe. The AutoDome Junior is also suitable for surface
(Section 4 Installing a Surface Mount, page 23), wall
(Section 5 Installing a Wall Mount, page 34), and recess
mounting (Section 6 Installing a Recessed Mount, page 46). For
specific directions on mounting the unit, see the manual that
came with your mount.
For an outdoor installation you must obtain the gaskets and O-
rings supplied with an AutoDome Junior Outdoor Camera to
ensure a water-tight environment inside the unit and to
maintain an IP Environmental Protection Rating.
NOTICE!
The image sensors in modern cameras are highly sensitive and
require special care for proper performance and extended
lifetime. Follow the guidelines for optimum results with your
camera:
–
–
F.01U.275.803 | 6.0 | 2012.11
Do not expose to direct sunlight or bright spotlights in
operating and nonoperating conditions.
Avoid bright lights in the field of view of the camera. Bright
lights cause a "smearing" effect, which is visible as white
lines above and below the highlight. Prolonged exposure to
bright lights may cause bleaching of the sensor's color
filters. This will be visible as colored spots in the picture
and is irreversible.
Installation Manual
AutoDome Junior HD
Bosch Security Systems, Inc.
Advertisement
Table of Contents
