Bosch VJR Series Installation Manual
  1. Manuals
  2. Brands
  3. Bosch Manuals
  4. Security Camera
  5. VJR SERIES
  6. Installation manual
Bosch VJR Series Installation Manual

Bosch VJR Series Installation Manual

Autodome junior hd
Hide thumbs Also See for VJR Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
AutoDome Junior HD
VJR Series
en
Installation Manual

Advertisement

Table of Contents
loading

Related Manuals for Bosch VJR Series

Summary of Contents for Bosch VJR Series

  • Page 1 AutoDome Junior HD VJR Series Installation Manual...

  • Page 3: Table Of Contents

    Installing the Camera to the Mounting Plate Installing a Pipe Mount Description 7.1.1 Tools/Supplies Required 7.1.2 Preparing the Ceiling for Installation 7.1.3 Installing the Camera to the Mounting Plate Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 4: Table Of Contents

    The Livepage 11.5.1 Entering a Keyboard Control Command 11.6 Commissioning the AutoDome Junior Fixed Camera 11.7 Saving Snapshots 11.8 Recording Video Sequences 11.9 Processor Load 11.10 The RECORDINGS Page F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 5: Autodome Junior Hd Table Of Contents | En

    Keyboard Commands by Number Preventive Maintenance Troubleshooting 15.1 AutoDome Junior Operation and Control BVIP Firmware Updates 16.1 Upgrading the AutoDome Junior IP or HD 16.2 Beginning the Firmware Update Process Index Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 6: Safety

    This will prevent damage to the unit from lightning and power line surges. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.
  • Page 7 – If unsure of the type of power supply to use, contact your dealer or local power company. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 8 16. Attachments, changes, or modifications - Only use attachments/accessories specified by the manufacturer. Any change to or modification of the equipment not expressly approved by Bosch could void the warranty or, in the case of an authorization agreement, authority to operate the equipment.

  • Page 9: Safety Precautions

    3 mm in each pole, into the electrical installation of the building. If it is needed to open the housing for servicing and/or other activities, use this all-pole Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 10 Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical...
  • Page 11 AutoDome Junior HD Safety | en Environmental statement - Bosch has a strong commitment to the environment. This unit has been designed to respect the environment as much as possible. Electrostatic-sensitive device - Take proper CMOS/MOS-FET handling precautions to avoid electrostatic discharge.
  • Page 12 Network Voltage (TNV) circuits. Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information.
  • Page 13 Commission fédérale des communications des États-Unis (FCC). Ces contraintes sont destinées à fournir une protection raisonnable contre les interférences nuisibles quand l'appareil est utilisé dans une installation commerciale. Cette appareil Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 14 CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT. Copyright This user guide is the intellectual property of Bosch Security Systems, Inc. and is protected by copyright. F.01U.172.910 | 4.0 | 2011.09 Installation Manual...
  • Page 15 The ongoing development of the products may mean that the content of the user guide can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between the user guide and the product described.

  • Page 16: Customer Support And Service

    | Safety AutoDome Junior HD Customer Support and Service If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers Repair Center Telephone: 800-566-2283 Fax: 800-366-1329 E-mail: repair@us.bosch.com...

  • Page 17: Unpacking

    Verify that all the parts listed in the Parts List are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative.

  • Page 18: Safety Rules

    Do not use the device in the presence of flammable substances. – Do not allow children or unauthorized personnel to use the device. – Do not block any ventilation openings. – Keep this manual for future reference. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 19: Description

    Figure 3.1 System Configuration Alarm Input (sensor) AutoDome Junior IP or HD Multiplexer Network RS-485 Cable Computer Junction Box Encoder/Decoder AutoDome Junior AutoDome Junior AutoDome Junior RS-485 Cable Monitor Keyboard Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 20 This installation should be made by qualified service personnel and conform to the National Electrical Code and applicable local codes. NOTICE! A grounded conduit is required in order to meet the EMC Regulation Requirements. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 21: Installing A Surface Mount

    Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable) – 4 in. x 4 in. Junction box with 90 mm (3.54 in.) mount holes (indoor installation) – One (1) ground – T-10 Torx wrench Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 22: Preparing The Surface Mount For An Indoor Installation

    Ensure junction box and mounting screws are capable of supporting a maximum load of 11.33 kg (25 pounds). 90 mm (3.54 in.) Figure 4.2 Install User-supplied Junction Box F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 23: Installing The Camera To The Mounting Plate

    Attach user supplied ground to junction box. Connect the mating connectors with the flying leads to the user supplied wiring (see Section 8 Preparing the Wiring, page 50 for wiring information). Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 24 Plug the matching connectors from the camera into the mating connectors from the ceiling. Figure 4.5 Connect Cables Locking Screw Vertical Tab Mounting Plate Align wires on side of mounting plate with crescent shaped cut-out. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.
  • Page 25 Figure 4.6 Tab/Slot Alignment Detail Vertical Tab (on mounting plate) Locking Screw Recessed Slot (on dome housing) Brass Button (total of three on housing) Slotted Tab (total of three on mounting plate) Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 26 Figure 4.7 Attach Dome to Mounting Plate Vertical tab 10. Secure the safety locking screw with the user supplied locking torx wrench (T-10). F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 27: Installing A Wall Mount

    Additional Tools Required – Appropriate straight slot screwdrivers – No. 2 Phillips screwdriver – Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable) – T-10 Torx wrench Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 28: Preparing The Wall Mount For An Indoor Installation

    Figure 5.1 Wall Mount Dimensions Fit a user-provided metal single-gang junction box to the wall. Attach a grounded metal conduit to the junction box clamp. Figure 5.2 Metal Conduit F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.
  • Page 29 The metal junction box and mounting surface must be capable of supporting a maximum load of 11.33 kg (25 pounds). Skip to Section 5.1.3 Installing the Camera to the Mounting Plate, page 30, to continue the installation. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 30: Installing The Camera To The Mounting Plate

    Attach user supplied ground to junction box. Connect the mating connectors with the flying leads to the user supplied wiring (see the Section 8 Preparing the Wiring, page 50 for wiring information). F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.
  • Page 31 (item 1, below) into the recessed slot on the top of the camera dome (Item 3) to the right of the safety locking screw (item 2). Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 32 Figure 5.7 Tab/Slot Alignment Detail Vertical Tab (on mounting plate) Locking Screw Recessed Slot (on dome housing) Brass Button (total of three on housing) Slotted Tab (total of three on mounting plate) F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.
  • Page 33 11. Secure the safety locking screw with the user supplied locking torx wrench (T-10). 12. Pull excess wire back into the mount tube. 13. Confirm that the housing is electrically grounded. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 34: Installing A Recessed Mount

    Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable) – 4 in. x 4 in. junction box (optional) – T-10 Torx wrench – VJR-A3-SP, support kit for VJR-A3-IC mounting kit F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 35: Preparing The Ceiling For Installation

    Optional: if installing the AutoDome Junior HD to a suspended ceiling tile or any other surface where additional support is required, the VJR-A3-SP mounting kit is recommended (supplied separately). Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 36 The ceiling/ drywall must have a maximum thickness of 41.7 mm (1.64 in.) and an minimum thickness of 12.7 mm (0.50 in.). F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.
  • Page 37 NOTICE! If you need to install the VJR-A3-SP Support Bracket, refer to the guide included with the bracket. Once the bracket is installed, continue with the next section. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 38: Installing The Camera To The Mounting Plate

    Connect the mating connectors (supplied in the accessory kit) with the flying leads to the user supplied wiring (see the Section 8 Preparing the Wiring, page 50 for wiring information). F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.
  • Page 39 (item 1, below) into the recessed slot on the top of the camera dome (Item 3) to the right of the safety locking screw (item 2). Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 40 Figure 6.6 Tab/Slot Alignment Detail Vertical Tab (on mounting plate) Locking Screw Recessed Slot (on dome housing) Brass Button (total of three on housing) Slotted Tab (total of three on mounting plate) F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.
  • Page 41 11. Align trim ring so the four alignment posts (item 1, below) align with the recesses in the camera housing (item 2) and so the two safety screws align with the off center holes (item 3) on the locking clamps. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 42 Note: Unit should not turn. 13. Use the supplied T-10 Torx wrench to secure the trim ring’s two (2) safety locking screws to the mounting bracket. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 43: Installing A Pipe Mount

    Tools/Supplies Required – Appropriate straight slot screwdrivers – No. 2 Phillips screwdriver – Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable) – T-10 Torx wrench Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 44: Preparing The Ceiling For Installation

    Use the four (4) holes in the flange as a template to mark the position where the holes should be drilled to secure the mount. Figure 7.2 Mark Flange Holes F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.
  • Page 45 Pull the wires from the pipe, starting at the flange end. Figure 7.3 Attach Pendant Pipe Mount to Ceiling CAUTION! Select a rigid mounting location to prevent excessive vibration to the AutoDome Junior Camera. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 46 (3) screws supplied (Figure 1.9). Figure 7.4 Attach Mounting Plate to Dome Cap Crescent Shape Ground Lug Dome Cap Mounting Plate F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 47: Installing The Camera To The Mounting Plate

    Figure 7.5 Unlock Safety Locking Screw Plug the matching connectors from the camera into the mating connectors from the ceiling. Align wires on side of mounting plate with crescent shaped cut-out. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 48 Figure 7.6 Tab/Slot Alignment Detail Vertical Tab (on mounting plate) Locking Screw Recessed Slot (on dome housing) Brass Button (total of three on housing) Slotted Tab (total of three on mounting plate) F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.
  • Page 49 10. Secure the safety locking screw with the user supplied locking torx wrench (T-10). 11. Pull excess wire back into the mount tube. 12. Confirm that the housing is electrically grounded. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 50: Preparing The Wiring

    Power to the camera in all indoor models is supplied either via a single 24 VAC isolated power connector or via a Power over Ethernet + (PoE+, IEEE 802.3at, class 4) connection using the existing CAT 5E Ethernet cable. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 51: Power Connections To Indoor Cameras

    24 VAC 24 VAC Black User-supplied Power Supply NOTICE! The camera unit accepts 24 VAC, 1.2 A power only. Do not connect 120 V or 230 V to this camera. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 52: Ethernet Connection (Ip Models)

    Cable Type CAT-5E or CAT 6 Ethernet Maximum Distance 100 m (328 ft) Bandwidth 10 Base-T/100 Base-TX PoE+ (indoor models only) IEEE 802.3at, class 4 standard Terminal Connector RJ45, Female F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 53: Audio, Alarms And Relay Connections

    Table 9.1 Alarm Wire Guide You wire alarms either Normally Open (N.O.) or Normally Closed (N.C.), and must program the alarm inputs N.O. (the default) or N.C. through the AutoDome Junior main menu. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 54: Connecting Alarms (Inputs 1 Through 2)

    Interface>Alarm Inputs. Refer to Section 12 Configuring the AutoDome Junior HD, page 79, for directions about accessing the Settings page. AutoDome Junior Programmed N.O. Circuit Alarm Indication Open Normal Closed Alarm F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 55: Connecting A Normally Closed Alarm

    Interface>Alarm Inputs. Refer to Section 12 Configuring the AutoDome Junior HD, page 79, for directions about accessing the Settings page. AutoDome Junior Programmed N.C. Circuit Alarm Indication Open Alarm Closed Normal Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 56: Alarm Outputs

    32 VDC @ 150 ma. Connect the appropriate stripped wire to the open collector of the transistor’s white wire. Connect the appropriate stripped wire to the ground (GND) connector. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 57: Audio Cables

    Internal gain level adjustment is available Wire Specifications Wire Type Coax (recommended) Distance 10 m (33 ft) Gage 22 AWG Shield Bare copper braid: 95% coverage Center conductor Stranded bare copper Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 58: Getting Started

    If you are using an AutoDome Junior IP or HD model, refer to Section 11 Using the IP Interface, page 59. WARNING! Before powering the dome on, remove the clear protective plastic sheet on top of the bubble. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 59: Using The Ip Interface

    Video images from a single camera can be simultaneously received on several receivers. Refer to Section 16 BVIP Firmware Updates, page 91, for firmware upgrade instructions. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 60: Overview Of Features

    Allows configuration for the recording options of the IP module. You can record video from the Livepage to a hard drive or you can opt to store up to 8 MB of video on the IP module. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 61: System Requirements

    You can find notes on using Microsoft Internet Explorer in the online Help in Internet Explorer. If you choose to use a computer running Microsoft Internet Explorer or any of the Bosch software, the computer must conform to the following minimum requirements: –...

  • Page 62: Connecting The Autodome Junior Hd To The Pc

    The AutoDome Junior HD can also be connected directly to a PC using an Ethernet crossover cable with RJ45 connectors (see option B below). Figure 11.1 AutoDome Junior HD System Configuration AutoDome Junior HD IP Connection Network Switch Computer F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 63: Configuring The Autodome Junior Hd Camera

    AutoDome Junior HD Using the IP Interface | en NOTICE! You can also use the Bosch Configuration Manager utility to configure the network settings for an AutoDome Junior IP or HD camera. Go to www.boschsecurity.com to download the Configuration Manager software and Operating Manual.

  • Page 64: Changing The Network Settings

    Subnet Mask, and a Gateway IP Address. Using the Configuration Manager Configuration Manager is an optional network utility provided on the Bosch Security Systems Web site. Use the Configuration Manager Manual to make any configuration changes. NOTICE! Depending on the PC network security settings, the user may have to add the new IP address to the browser’s trusted sites...
  • Page 65 Configure the settings on this page based on the addresses provided by your local network administrator. NOTICE! Click the Help on this page? link if you need more information. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 66: The Livepage

    Other information may be shown next to live video image on the Livepage. The display depends on the settings on the Livepage Configuration page (see the AutoDome Junior IP online help). F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.
  • Page 67 While discovery is executed, gaps might be shown in places which the discovery has not yet reached. The gap will automatically be replaced by the true video, as soon as the correct information is available. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 68 If you do not connect, the unit may have reached its maximum number of connections. Depending on the unit and network configuration, each AutoDome Junior IP can have up to 25 Web browser connections or up to 50 connections via the Bosch Video Management System. Protected AutoDome Junior IP...
  • Page 69 2. This button is also used as the "Enter" button to select menu items from the AUX tab. To control a peripheral, click the appropriate controls. Move the mouse cursor over the video image. Additional options for controlling peripherals are displayed with the mouse cursor. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 70 To activate this, click the icon for the relay next to the video image. The icon will be red when the relay is activated. System Log / Event Log F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 71: Entering A Keyboard Control Command

    (Show Shot, Set Shot Aux On or Aux Off). A valid combination either issues a command to the camera or displays an on-screen menu. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 72 If the command initiates a menu, use the Up/Down arrows on the View Control to navigate the menu. Click the Focus or Iris button to select a menu item. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 73: Commissioning The Autodome Junior Fixed Camera

    This section provides instructions for setting the position and the zoom level for an AutoDome Junior HD Fixed camera (VJR- F801 Series). Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 74 Close the View Control window to set the camera’s position and the zoom level. Click the LIVEPAGE link, in the upper section of the window. 10. To reset the position and zoom level, repeat these steps. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 75: Saving Snapshots

    Livepage settings on the Settings page. NOTICE! You can play back saved video sequences using the Player from Bosch Security Systems, which can be installed from the product CD supplied. Image Resolution Sequences are saved at the resolution that has been preset in the configuration for the encoder (see Section 12.3 Basic Mode:...

  • Page 76: Processor Load

    Click a list entry. The playback for the selected sequence starts immediately in the video window. Use the arrow buttons below the list to browse the list. Select the number of entries that are displayed simultaneously. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.
  • Page 77 Leap to the start of the active video sequence or to the previous sequence Leap to the start of the next video sequence Slide Control You can use the slide control to control playback speed. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 78 Bookmarks are only valid while you are in the RECORDINGS page; they are not saved with the sequences. As soon as you leave the page all bookmarks are deleted. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 79: Configuring The Autodome Junior Hd

    All settings are backed up in the AutoDome Junior HD memory so they are not lost even if the power fails. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 80: Basic Mode: Device Access

    The name makes the task of administering multiple units in larger video monitoring systems easier, for example using the Bosch Video Management System programs. The device name is used for the remote identification of a unit, in the event of an alarm for example. For this reason, enter a name that makes it as easy as possible to quickly identify the location.
  • Page 81 NOTICE! A new password is only saved when you click the Set button. You should therefore click the Set button immediately after entering and confirming a password. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 82: Basic Mode: Date/Time

    Set button changes to Set and Reboot. Make the desired changes. Click the Set and Reboot button. The AutoDome Junior HD is rebooted and the changed settings are activated. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 83: Basic Mode: Encoder

    IP addresses, you can activate acceptance of IP addresses automatically assigned to the AutoDome Junior HD. Certain applications (VIDOS, Bosch Video Management System, Archive Player, Configuration Manager) use the IP address for the unique assignment of the unit. If you use these applications,...
  • Page 84 Target bit rate: 20 kbps Maximum bit rate: 22 kbps Encoding interval: 15.00 ips – Target bit rate: 7 kbps Maximum bit rate: 8 kbps Encoding interval: 7.50 ips F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 85: Basic Mode: Audio

    Here you can select a storage medium and immediately start the recording. Storage medium Select the required storage medium from the list. Click the Start button to start the recording immediately. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 86: Basic Mode: System Overview

    You can select all required text on this page with the mouse and copy it to the clipboard with the [Ctrl]+[C] key combination, for example if you want to send it via e-mail. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 87: Keyboard Commands By Number

    Digital Zoom Turns digital zoom on and off Lock On/Off Sector Enables/Disables Sector Blanking Blanking * denotes a command applicable to the AutoDome Junior HD PTZ and Fixed cameras. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 88: Preventive Maintenance

    Do not scrape the bubble with razor blades or other sharp instruments. – Do not use Benzene, Gasoline, Acetone, or Carbon Tetrachloride on the bubble. – Do not clean bubbles in direct sunlight or on very hot days. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 89: Troubleshooting

    Set the synchronization mode to INT.NTSC Model power frequency in LL mode: 60 Hz. Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...

  • Page 90: Autodome Junior Operation And Control

    Settings window. – Click the Installer Menu, located under the Camera link. – Select either 50 or 60 Hz from the Frequency pull-down list. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 91: Bvip Firmware Updates

    The AutoDome Junior IP and HD also allows an operator to update the BVIP firmware via the TCP/IP network. The latest BVIP firmware is available on the Bosch Security Systems Web site. To download the service pack from the Web, navigate to www.boschsecurity.us, click the CCTV link, then...

  • Page 92: Beginning The Firmware Update Process

    Note: Once the progress bar reaches 100% the system opens the reset page. Allow the reset page to complete its action. Once the reset is complete the upgrade is complete. F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.

  • Page 93: Index

    DirectX 61 selection 68 Display stamping 67 CAT-5E 52 displaying CAT-6 52 on-screen menus 71 CCD cameras 21 drywall ceiling 22 command numbers 71 dual streaming 60 DVR 19 F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.
  • Page 94 22 record 60 preset shot 73 snapshots 60 processor load 76 subnet mask 64 processor load indicator 76 system requirements 61 profiles 84 UDP 90 JPEG 60 Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 95 DirectX 61 storage medium 85 subnet mask 64 synchronize 82 system log 71 TCP/IP 59 time 82 time server 82 IP address 82 protocol 82 time signal 82 F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.
  • Page 96 AutoDome Junior HD Index | en Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 97 | Index AutoDome Junior HD F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.
  • Page 98 AutoDome Junior HD Index | en Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 99 | Index AutoDome Junior HD F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.
  • Page 100 AutoDome Junior HD Index | en 100 Bosch Security Systems, Inc. Installation Manual F.01U.172.910 | 4.0 | 2011.09...
  • Page 101 101 en | Index AutoDome Junior HD F.01U.172.910 | 4.0 | 2011.09 Installation Manual Bosch Security Systems, Inc.
  • Page 102 102 en | Index AutoDome Junior HD F.01U.172.910 | 4.0 | 2010.12 Installation Manual Bosch Security Systems, Inc.
  • Page 104 Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA 17601 U.S.A. www.boschsecurity.com © Bosch Security Systems, Inc., 2011...

This manual is also suitable for:

Autodome junior hd vjr series

Table of Contents