Table of Contents
Advertisement
174 en | Configuring the AutoDome Junior HD
unit). The AutoDome Junior HD supports multi-unicast
connections for up to five simultaneously connected receivers.
NOTICE!
Duplication of data places a heavy demand on the unit and can
lead to impairment of the image quality under certain
circumstances.
Port
Assign a different port to each data stream if there are
simultaneous data streams at the same multicast address.
Enter the port address of the required stream here.
Streaming
Click the checkbox to activate multicast streaming mode for the
relevant stream. An enabled stream is indicated by a check
mark. The device even streams multicast data if no connection
is active.
Multicast packet TTL
You can enter a value to specify how long the multicast data
packets are active on the network. This value must be greater
than one if multicast is to be run via a router.
12.49
FTP Posting
You can save individual JPEG images on an FTP server at
specific intervals. You can then retrieve these images at a later
date to reconstruct alarm events if required.
File name
You can select how file names will be created for the individual
images that are transmitted.
–
–
F.01U.275.803 | 6.0 | 2012.11
Overwrite
The same file name is always used and any existing file will
be overwritten with the current file.
Increment
A number from 000 to 255 is added to the file name and
automatically incremented by 1. When it reaches 255 it
starts again from 000.
Installation Manual
AutoDome Junior HD
Bosch Security Systems, Inc.
Advertisement
Table of Contents
