Table of Contents
Advertisement
AutoDome Junior HD
10. Rotate the camera approximately 15 degrees in a
11. Secure the safety locking screw with the user supplied
12. Pull excess wire back into the mount tube.
13. Confirm that the housing is electrically grounded.
Bosch Security Systems, Inc.
clockwise direction to lock firmly into place, as shown in
the next illustration. Note: Do not loosen brass mounting
buttons.
Figure 5.11 Attach Dome to Mounting Plate
locking torx wrench (T-10).
Installation Manual
Installing a Wall Mount | en
F.01U.275.803 | 6.0 | 2012.11
45
Advertisement
Table of Contents
