Table of Contents
Advertisement
88
en | Using the IP Interface
11
Using the IP Interface
The AutoDome Junior HD transmits PTZ control commands and
images over a TCP/IP network. It also allows users to configure
the camera display settings, camera operating settings, and to
configure the network parameters.
The HD unit incorporates a network video server in the IP
module. The primary function of the server is to encode video
and control data for transmission over a TCP/IP network. With
its H.264 encoding, it is ideally suited for IP communication and
for remote access to digital video recorders and multiplexers.
The use of existing networks means that integration with CCTV
systems or local networks can be achieved quickly and easily.
Video images from a single camera can be simultaneously
received on several receivers.
Refer to Section 16 BVIP Firmware Updates, page 185, for
firmware upgrade instructions.
F.01U.275.803 | 6.0 | 2012.11
Installation Manual
AutoDome Junior HD
Bosch Security Systems, Inc.
Advertisement
Table of Contents
