Table of Contents
Advertisement
AutoDome Junior HD
8.3
Ethernet Connection
The AutoDome Junior HD connects to a 10 Base-T/100 Base-TX
network either directly or via a switch. Both video and control
are transmitted over a standard TCP/IP network using the built-
in Web server. In addition, power is supplied to an AutoDome
Junior HD camera via the Ethernet cable compliant with the
Power-over-Ethernet + (IEEE 802.3at, class 4) standard.
NOTICE!
The heater in an outdoor AutoDome Junior HD unit accepts
power only from a 24 VAC power source. The heater cannot be
powered via the Power-over-Ethernet + (IEEE 802.3at, class 4)
standard.
CAUTION!
Ethernet connections must be made to non-exposed (indoor)
networks only.
Cable Type
Maximum Distance
Bandwidth
PoE+ (indoor models only)
Terminal Connector
Bosch Security Systems, Inc.
CAT-5E or CAT 6 Ethernet
100 m (328 ft)
10 Base-T/100 Base-TX
IEEE 802.3at, class 4 standard
RJ45, Female
Installation Manual
Preparing the Wiring | en
F.01U.275.803 | 6.0 | 2012.11
81
Advertisement
Table of Contents
