Table of Contents
Advertisement
46
en | Installing a Recessed Mount
6
Installing a Recessed Mount
6.1
Description
This chapter details how to install an AutoDome Junior into an
indoor ceiling space or into an outdoor soffit. You must use the
VJR-A3-IC54 AutoDome Junior IP54-rated In-ceiling mount kit
(sold separately) if your indoor application must be plenum
rated or rated to the IP54 standard. All outdoor recessed
applications must use the VJR-A3-IC54 kit.
The AutoDome Junior is also suitable for surface
(Section 4 Installing a Surface Mount, page 23), wall
(Section 5 Installing a Wall Mount, page 34), and pipe mounting
(Section 7 Installing a Pipe Mount, page 66). For specific
directions on mounting the unit, see the manual that came with
your mount.
NOTICE!
The image sensors in modern cameras are highly sensitive and
require special care for proper performance and extended
lifetime. Follow the guidelines for optimum results with your
camera:
–
–
F.01U.275.803 | 6.0 | 2012.11
Do not expose to direct sunlight or bright spotlights in
operating and nonoperating conditions.
Avoid bright lights in the field of view of the camera. Bright
lights cause a "smearing" effect, which is visible as white
lines above and below the highlight. Prolonged exposure to
bright lights may cause bleaching of the sensor's color
filters. This will be visible as colored spots in the picture
and is irreversible.
Installation Manual
AutoDome Junior HD
Bosch Security Systems, Inc.
Advertisement
Table of Contents
