Table of Contents
Advertisement
144 en | Configuring the AutoDome Junior HD
1.
2.
3.
4.
5.
CAUTION!
If older recordings are not allowed to be overwritten when the
available memory capacity has been used, the recording in
question will be stopped. You can specify limitations for
overwriting old recordings by configuring the retention time
(see Section 12.33 Retention Time, page 148).
F.01U.275.803 | 6.0 | 2012.11
In the Recording media section, click the iSCSI Media and
Local Media tabs to display the applicable storage media
in the overview.
In the Storage overview section, double-click the required
storage medium, an iSCSI LUN or one of the other
available drives. The medium is then added to the
Managed storage media list. In the Status column, newly
added media are indicated by the status Not active.
Click the Set button to activate all media in the Managed
storage media list. In the Status column, these are
indicated by the status Online.
Check the box in the Rec. 1 or Rec. 2 to specify which data
stream should be recorded on the storage media selected.
Rec. 1 stores Stream 1, Rec. 2 stores Stream 2. This
means that you can record the standard data stream on a
hard drive and record alarm images on the mobile CF card,
for example.
Check the boxes for the Overwrite older recordings
option to specify which older recordings can be
overwritten once the available memory capacity has been
used. Recording 1 corresponds to Stream 1, Recording 2
corresponds to Stream 2.
Installation Manual
AutoDome Junior HD
Bosch Security Systems, Inc.
Advertisement
Table of Contents
